Overview & technical details
Product introduction
PETROGEN LA 40 is a mineral-based lubricant in the Low-Ash category, developed for stationary gas engines used in power generation and combined heat and power applications. Selected mineral base oils and a balanced additive system help maintain lubricant performance under thermal, oxidation and nitration stresses.
Its controlled-ash formulation helps limit lubricant-derived inorganic deposits in the combustion system while maintaining protection of engine components.
Features and benefits
- Thermal and oxidative stability: Helps maintain lubricant performance at elevated temperatures and under oxidative stress.
- Nitration resistance: Supports lubricant durability where nitration can contribute to oil degradation.
- Component protection: Anti-wear and corrosion protection help protect engine components during operation.
- Viscosity stability: Supports lubrication of stationary gas engines under operating conditions.
- Its controlled-ash formulation helps limit lubricant-derived inorganic deposits in the combustion system while maintaining protection of engine components.
Applications
- Stationary gas engines in electrical power-generation units
- Combined heat and power (CHP) / cogeneration systems
- Gas engines requiring SAE 40 lubricants
- Applications specifying a maximum sulfated ash level of approximately 0.5 wt.%
Use with natural gas and other gaseous fuels is subject to the lubricant requirements specified by the engine manufacturer.
Technical specifications
| Property | Typical value | Unit | Test method |
|---|---|---|---|
| SAE viscosity grade | 40 | — | — |
| Density at 15 °C | 0.8944 | g/cm³ | ASTM D4052 |
| Kinematic viscosity at 40 °C | 151.1 | cSt | ASTM D445 |
| Kinematic viscosity at 100 °C | 15.08 | cSt | ASTM D445 |
| Viscosity index | 100 | — | ASTM D2270 |
| Flash point, open cup | 215 | °C | ASTM D92 |
| Pour point | -21 | °C | ASTM D97 |
| Sulfated ash | 0.50 | wt.% | ASTM D874 |
| Total base number (TBN) | 5.2 | mg KOH/g | ASTM D2896 |
Values shown are typical product characteristics.
Selection and use
Before use, verify the viscosity grade, ash level and lubricant requirements against the engine manufacturer’s latest technical documentation. An SAE 40 viscosity grade alone does not establish interchangeability between gas and diesel engine oils, or between low-ash and medium-ash oils. When changing from another lubricant, assess compatibility and carry out appropriate flushing where required. Monitor used oil according to manufacturer requirements and operating conditions. Determine oil-change intervals in accordance with the engine manufacturer’s recommendations.
Safety and handling
Follow the product Safety Data Sheet (SDS) and site procedures for safety requirements, personal protective equipment, handling, storage and disposal.
