PETROFOND INTERNATIONAL · SPECIALIST INDUSTRIAL SOLUTIONS+98 21 8852 3698
Antifreeze

PETROFREEZE C 37

Concentrated monoethylene glycol antifreeze with organic corrosion inhibitors. Dilute before use; a 50/50 mixture freezes at −37°C.
Discuss this product

+98 21 8852 3698Technical & sales support

View full product specifications
PRODUCT INFORMATION

Overview & technical details

Concentrate: dilute before use. −37°C refers to a 50/50 mixture by volume.

Product Introduction

PETROFREEZE C37 is a concentrated monoethylene glycol -based antifreeze formulated with selected organic corrosion inhibitors (OAT). It contains no amines, nitrites or phosphates. When diluted with an appropriate amount of demineralised or softened water, it forms a coolant suitable for the cooling systems of internal combustion engines. Its formulation is designed to protect metal components against corrosion, help maintain appropriate coolant chemistry and reduce problems associated with foam formation. When diluted at a suitable ratio, PETROFREEZE C37 can serve as a year-round engine coolant.

How It Works

The coolant prepared from PETROFREEZE C37 circulates through the engine cooling system, absorbs heat generated by the engine and transfers it to the radiator, helping regulate engine operating temperature. The organic corrosion inhibitors help protect metal surfaces in contact with the coolant. The formulation also provides an alkalinity reserve to neutralise acids arising from combustion gases, while its additives help limit the persistence of foam.

Features and Benefits

Protection against metal corrosion: Selected organic inhibitors help protect metal components in the cooling system. According to the manufacturer, the product performs well in the specified hot-plate and glassware corrosion tests. Alkalinity reserve: The formulation provides an alkalinity reserve that helps neutralise acids associated with combustion gases and maintain appropriate coolant chemistry. Foam resistance: The additives help reduce the persistence of foam that may form in the coolant. Chemical neutrality and pH control: The manufacturer states a pH range of 7–8.5; the measured pH reported in the technical data sheet is 8.2. Compatibility with seals and coatings: The coolant obtained after dilution is described by the manufacturer as inert to elastomeric seals and paints. Year-round use: When prepared at an appropriate dilution ratio, PETROFREEZE C37 can be used as a permanent engine coolant throughout the year. Selected inhibitor formulation: PETROFREEZE C37 contains selected organic corrosion inhibitors and is free from amines, nitrites and phosphates.

Applications

Internal combustion engine cooling systems: After dilution with demineralised or softened water, PETROFREEZE C37 is intended for use in engine cooling systems. Permanent engine coolant: A properly prepared mixture can be used throughout the year as an engine coolant. Temperature-dependent coolant preparation: The volume ratio of concentrate to water can be selected to achieve an initial crystal-formation temperature appropriate for the intended operating conditions.

Directions for Use and Dilution Ratios

PETROFREEZE C37 must be mixed with demineralised or softened water before use. To prepare a 50/50 mixture by volume, combine equal volumes of concentrate and suitable water. The manufacturer recommends mechanical mixing to obtain a homogeneous coolant. The initial crystal-formation temperature of the prepared coolant depends on the proportion of PETROFREEZE C37 in the mixture.

C37 (% by volume)Initial crystal-formation temperature
33%−20°C
40%−26°C
50%−37°C
68%−69°C

Technical Specifications

PropertyValueUnitTest method
Density at 20°C1.11g/cm³ASTM D4052
pH8.2—ASTM D1287
Reserve alkalinity to pH 5.52.8mL HCl 0.1NASTM D1121
Freezing point (50/50 mixture)−37°CASTM D1177

Values are those declared in the manufacturer’s technical data sheet.

Declared Standards

According to the PETROFOND technical data sheet, PETROFREEZE C37 meets the requirements of BS 6580:2010 and ASTM D3306, which address performance requirements for engine antifreezes and coolants.

Service and Maintenance

The manufacturer recommends replacing the prepared coolant annually. The dilution ratio and servicing procedures should also follow the requirements of the vehicle or equipment manufacturer.

Safety and Environmental Protection

According to the manufacturer’s technical data sheet, monoethylene glycol -based antifreezes and coolants are regarded as special industrial waste. Used coolant must therefore be collected and delivered to an approved waste-disposal facility in accordance with applicable environmental regulations. For product-specific hazards, precautions and safe-handling requirements, consult the safety data sheet (SDS) for PETROFREEZE C37.

Download documentsFA · PDFEN · PDF
IT STARTS WITH YOUR APPLICATION

Every challenge. A way forward.

From fluid selection to machine modernization, get in touch with the Petrofond team.

Tell us about your project
PETROFOND / SEARCH

Enter a product name, model or topic to explore.