PETROCOOL S-B-503

PETROCOOL S-B-503 product is a synthetic water-soluble fluid (Coolant) for metal machining. This product is suitable for machining metals such as steel, cast iron, copper and brass alloys, which forms a transparent and very stable solution after dilution. The formulation of this product is designed using advanced technology based on the structure of organic acids and has a long lifespan. This product is not recommended for machining magnesium and magnesium alloys.

PHYSICAL CHARACTERISTICS

Appearance light blue

Viscosity (cSt) 4

Density (kg/l) 1.05
pH (5%) 9.5
Refractive factor. 2.5

Corrosion Test (5%). No Rust

product introduction

Characteristics

PETROCOOL S-B-503 product is a new generation formulation that creates a clear uniform solution after mixing with water and has the following special advantages:

• Excellent mixing speed with water
• Great cooling effect
• Excellent compatibility for a wide range of hard waters
• Very high protection against corrosion of parts, tools and device body
• Excellent chip removal and removal of chips from the machining area
• Proper visibility of parts and tools during operation
• Easy control of solution concentration
• Long life
• Very low consumption and cost reduction

PETROCOOL S-B-503 product is stable in water with hardness between 80 ppm and 1000 ppm. Also, due to the use of a formulation with anti-foam properties, it can be used with water with low hardness and without the need to add anti-foam. This product can be used in light and medium machining operations, taking into account the type of operation, the type of part and tool, and the water hardness with different percentages from 3% to 5%.

• In case of contact with skin or eyes, wash the area immediately with water.
• After the end of the usage period, do not discharge the soapy water into the environment.
• If swallowed, seek medical attention immediately.

Storage

• Store in a closed place at a temperature above 5°C and below 40°C.
• It will last up to six months in the original packaging.
• Close the container properly after use to prevent evaporation or contamination of the product.